SuperMicro - 5013G-i (bare bone system)
1U, Super P4SGE motherboard, P4 845GE chipsets, 250W power supply, 400/533 FSB, floppy, CDROM drive
Key Features
1. Single IntelR PentiumR 4 Support up to 3.06 GHz
2. Up to 2GB DDR 333/266/200 SDRAM
3. 1 x 32-bit 33MHz Full-height, Full-length PCI Expansion Slot
4. 2 x IntelR 82540EM Gigabit Ethernet Ports
5. IntelR EXTREME Graphics Accelerator
6. 2 x 3.5" IDE Drive Bays
7. 250W Power Supply
 |
 |
| CPU |
|
¡E Single mPGA478 ZIF Sockets
¡E Supports an IntelR PentiumR 4 processor with 512KB of integrated Advanced Transfer Cache up to 3.06GHz
¡E Supports an IntelR CeleronR processor with 128KB of integrated Advanced Transfer Cache up to 2.2GHz |
 |
| System Bus |
|
533 / 400MHz system bus |
|
|
|
| Memory Capacity |
|
¡E Two 184-pin DIMM sockets
¡E Supports up to 2 GB of DDR333/266/200 memory
¡E Dual channel memory bus
¡E Memory must be populated in pairs |
|
| Memory Type |
|
DDR333/266/200 non-ECC, unbuffered SDRAM, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
256 MB, 512 MB, 1 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
¡E IntelR 845GE chipset
¡E GMCH + ICH4 |
|
| Network Controllers |
|
¡E Dual IntelR 82540EM Gigabit Ethernet
¡E Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
On-chip IntelR EXTREME Graphics Accelerator |
|
|
|
| 1x full-height, full-length 32-bit 33MHz PCI expansion slot (with Riser Card) |
|
|
|
| IDE |
|
¡E Dual EIDE channels support up to four UDMA IDE devices
¡E Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
| USB |
|
Up to 6 USB ports |
|
| Infrared |
|
1 Infrared port header |
|
| Serial Ports |
|
2 Fast UART 16550 serial ports |
|
| Parallel Port |
|
1 ECP/EEP Parallel Port |
|
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with AwardBIOSR |
|
| BIOS Features |
|
¡E Plug and Play (PnP)
¡E APM 1.2
¡E DMI 2.3 support
¡E PCI 2.2
¡E ACPI 1.0
¡E BIOS rescue hot keys
¡E Hardware BIOS virus protection
¡E USB Keyboard support |
| |
|
|
|
| Form Factor |
|
1U Rackmount |
|
| Model |
|
SC810 |
|
|
|
| Height |
|
1.7" (43mm) |
|
| Width |
|
16.8" (426mm) |
|
| Depth |
|
22.6" (574mm) |
|
| Gross Weight |
|
34 lbs (15.4 kg) |
|
| Available Colors |
|
Beige, Black |
|
|
|
| Buttons |
|
¡E Power On/Off button
¡E System Reset button |
|
| LEDs |
|
¡E Power LED
¡E Hard drive activity LED
¡E 2x Network activity LEDs
¡E System Overheat LED |
|
|
|
| Internal Bay |
|
2x 3.5" Internal Drive Bays |
|
|
|
| Thermal control 250W AC power supply [ 24-pin ] |
|
| AC Voltage |
|
¡E 100 - 240V, 47-63Hz, 4 Amp
¡E 5V + 3.3V ? 230W
¡E 12V + 5V + 3.3V ? 250W |
|
| +5V |
|
25.0 amp |
|
| +5V standby |
|
2.0 amp |
|
| -5V |
|
0.3 amp |
|
| +12V |
|
13.0amp |
|
| -12V |
|
0.8 amp |
|
| +3.3V |
|
20.0 amp |
|
|
|
| CPU |
|
¡E Monitors for CPU Cores, +3.3V, +5, ¡Ó12V, +3.3V/+5V Standby, VBAT
¡E CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.1V-1.85V
¡E Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
¡E Total of four 3-pin fan headers
¡E 3x fans with tachometer monitoring
¡E Status monitor with firmware/software on/off control |
|
| Temperature |
|
¡E Monitoring for CPU, chassis, environment
¡E CPU thermal trip support |
|
| LED |
|
¡E CPU Overheat LED
¡E System Overheat LED
¡E +5V standby alert LED
¡E Suspend-state indicator LED |
|
| Other Features |
|
¡E Chassis intrusion detection
¡E Chassis intrusion header |
| | | |
|
|
Weight: 35.00 lbs
|